2-Amp Direct-Mount Battery Charger & Maintainer (NOCO GENIUS2D)
Introducing the GENIUS2D, one of our most powerful, highest-performing, energy-efficient, and compact chargers yet. The GENIUS2D is a 2-amp direct-mount battery charger and battery maintainer engineered to be securely mounted nearby the battery. It is designed for all types of 12-volt lead-acid batteries, including flooded, gel, AGM, and other maintenance-free batteries.
The Next Generation: Direct-Mount Onboard Charging Solution
Engineered and tested to withstand rugged working environments, like high-heat engine compartments, shock, vibration, and even water exposure. The GENIUS2D is the ultimate mountable on-board battery charger and battery maintainer for any car, boat, truck, RV, or equipment, and is designed to be located in close proximity to the battery.
More Powerful And Compact: Incredibly Smart Technology
Introducing the next generation of battery charging with all-new maximum power density technology. This smart charger has insanely high performance and is designed to be the most compact, lightweight, and energy-efficient charger on the market. Using advanced power conversion topologies as its foundation, the GENIUS2D has significantly increased the power-to-space ratio utilizing power magnetics, consolidated components, and innovative thermal management techniques.
Completely Automatic: Worry-Free Year-Round Charging
Finally, a charger from start to finish that’s completely automatic. No special modes, no technical knowledge required. Genius will safely charge any battery. It detects damaged batteries and intuitively repairs them, and actively monitors for long-term battery maintenance to extend battery life. This system allows for continuous operation without user intervention, and zero risk of overcharging your battery.
Thermal Compensation: Optimized For Any Climate
The GENIUS2D now features an integrated thermal sensor that automatically monitors and adjusts the charging cycle based on fluctuations of ambient temperature, enabling it to provide more precision charging in both hot and cold climates. Not only does it increase charge performance, but it extends battery life by limiting the impact of under-charging or over-charging caused by temperature changes. So now, when you are charging in cold temperatures, the charging rates increase, and when in hotter temperatures, the rates will decrease. The result: better, more accurate, fully-charged batteries.
Simple Installation Steps
- Secure Bracket: Use a drill to secure the mounting bracket using self-tapping screws (included).
- Attach Strap: Loop the velcro mounting strap into the mounting bracket.
- Mount GENIUS2D: Clip the GENIUS2D charger into the mounting bracket.
- Fasten Straps: Fasten the GENIUS2D charger using the velcro mounting strap.
| Guarantee (months): |
36
|
|
| Voltage line (v): |
100 - 240
|
|
| Frequency (Hz): |
50 - 60
|
|
| Operating temperature (C): |
-20 - 40
|
|
| Storage temperature (C): |
-30 - 60
|
|
| Moisture: |
Από 0% έως 95% χωρίς συμπύκνωση
|
|
| 12V: |
Ναι
|
|
| DC Safety Size (AMP): |
10
|
|
| Charging current in a state of 12V (AH): |
2
|
|
| Possibility of charging liquid electrolite: |
Ναι
|
|
| Ability to charge min/max in AH Capacity in 12V: |
Έως και 40Ah
|
|
| Ability to maintain min/max capacity in AH in 12V mode: |
Όλους τους τύπους μπαταριών
|
|
| Consumption (Watt): |
28
|
|
| Efficiency at 120Vac: |
87%
|
|
| Efficiency at 230vac: |
87%
|
|
| Short circuit protection: |
Ναι
|
|
| Open Circuit Protection: |
Ναι
|
|
| Overheating protection: |
Ναι
|
|
| Overload protection: |
Ναι
|
|
| Protection of sparks: |
Ναι
|
|
| Protection of reverse polarity: |
Ναι
|
|
| Total Width (mm): |
89
|
|
| Total height (mm): |
41
|
|
| Total depth (mm): |
59
|
|
| Weight (kg): |
0.23
|
|
| DC cable length (mm): |
609
|
|
| DC cable size (AWG): |
18
|
|
| AC cable length (mm): |
609
|
|
| AC cable size (AWG): |
18
|
|
| Insulation: |
IP65
|
|
